Considering an ECU remap for your Dacia Sandero TCe 90 90hp? A Stage 1 remap can take this 2021 -> petrol engine from 90 BHP to 110 BHP and from 160 Nm to 210 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Dacia Sandero can achieve.
The Dacia Sandero TCe 90 90hp is a 1.0L turbocharged petrol engine producing 90 BHP and 160 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 110 BHP and 210 Nm — a gain of around 20 BHP (22%) and 50 Nm (31%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.0i SCe 67hp | 67 → 73 | +6 | 95 → 105 |
| +10 |
| Moderate (4/10) |
| TCE 100 Eco-G 100hp | 100 → 115 | +15 | 170 → 200 | +30 | Good (7/10) |
Get a personalised remap quote for your Dacia Sandero. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
