Considering an ECU remap for your Dodge Caliber 2.0i 158hp? A Stage 1 remap can take this 2006 - 2011 petrol engine from 158 BHP to 180 BHP and from 191 Nm to 210 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Dodge Caliber can achieve.
The Dodge Caliber 2.0i 158hp is a 2.0L naturally aspirated petrol engine producing 158 BHP and 191 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 210 Nm — a gain of around 22 BHP (14%) and 19 Nm (10%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 CRD 140hp | 140 → 175 | +35 | 320 → 400 | +80 | Good (7.5/10) |
| 163 → 200 |
| +37 |
| 320 → 370 |
| +50 |
| Good (7/10) |
| 2.4i 172hp | 172 → 195 | +23 | 224 → 245 | +21 | Moderate (4.5/10) |
| 2.4T 295hp | 295 → 330 | +35 | 363 → 420 | +57 | Good (6/10) |
Get a personalised remap quote for your Dodge Caliber. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
