Considering an ECU remap for your Dodge Caliber 2.4i 172hp? A Stage 1 remap can take this 2006 - 2011 petrol engine from 172 BHP to 195 BHP and from 224 Nm to 245 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Dodge Caliber can achieve.
The Dodge Caliber 2.4i 172hp is a 2.4L naturally aspirated petrol engine producing 172 BHP and 224 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 195 BHP and 245 Nm — a gain of around 23 BHP (13%) and 21 Nm (9%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 CRD 140hp | 140 → 175 | +35 | 320 → 400 | +80 | Good (7.5/10) |
| 2.0i 158hp |
| 158 → 180 |
| +22 |
| 191 → 210 |
| +19 |
| Moderate (4.5/10) |
| 2.2 CRD 163hp | 163 → 200 | +37 | 320 → 370 | +50 | Good (7/10) |
| 2.4T 295hp | 295 → 330 | +35 | 363 → 420 | +57 | Good (6/10) |
Get a personalised remap quote for your Dodge Caliber. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
