Considering an ECU remap for your Fiat Ulysse 2.0 JTD 136hp? A Stage 1 remap can take this All diesel engine from 136 BHP to 165 BHP and from 320 Nm to 375 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat Ulysse can achieve.
The Fiat Ulysse 2.0 JTD 136hp is a 2.0L turbocharged diesel engine producing 136 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 165 BHP and 375 Nm — a gain of around 29 BHP (21%) and 55 Nm (17%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 JTD 110hp | 110 → 132 | +22 | 250 → 292 | +42 | Good (7/10) |
| 2.2 JTD 128hp | 128 → 155 | +27 | 314 → 400 | +86 | Good (7.5/10) |
Get a personalised remap quote for your Fiat Ulysse. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
