Considering an ECU remap for your Fiat Ulysse 2.2 JTD 128hp? A Stage 1 remap can take this All diesel engine from 128 BHP to 155 BHP and from 314 Nm to 400 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat Ulysse can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Fiat Ulysse 2.2 JTD 128hp is a 2.2L turbocharged diesel engine producing 128 BHP and 314 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 155 BHP and 400 Nm — a gain of around 27 BHP (21%) and 86 Nm (27%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain |
|---|
| Torque |
|---|
| Gain |
|---|
| Score |
|---|
| 2.0 JTD 110hp | 110 → 132 | +22 | 250 → 292 | +42 | Good (7/10) |
| 2.0 JTD 136hp | 136 → 165 | +29 | 320 → 375 | +55 | Good (7/10) |
Get a personalised remap quote for your Fiat Ulysse. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
