Expected gains of +25 BHP and +27 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Ford Everest 2.0T Ecoboost 245hp? A Stage 1 remap can take this 2015 - 2018 petrol engine from 245 BHP to 270 BHP and from 373 Nm to 400 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Everest can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Ford Everest 2.0T Ecoboost 245hp is a 2.0L turbocharged petrol engine producing 245 BHP and 373 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 270 BHP and 400 Nm — a gain of around 25 BHP (10%) and 27 Nm (7%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain |
|---|
| Score |
|---|
| 2.0 Ecoblue 180hp | 180 → 190 | +10 | 420 → 450 | +30 | Moderate (5.5/10) |
| 3.2 TDCI 195hp | 195 → 230 | +35 | 470 → 550 | +80 | Good (7/10) |
Get a personalised remap quote for your Ford Everest. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.