Considering an ECU remap for your Ford Everest 3.2 TDCI 195hp? A Stage 1 remap can take this 2015 - 2018 diesel engine from 195 BHP to 230 BHP and from 470 Nm to 550 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Everest can achieve.
The Ford Everest 3.2 TDCI 195hp is a 3.2L turbocharged diesel engine producing 195 BHP and 470 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 230 BHP and 550 Nm — a gain of around 35 BHP (18%) and 80 Nm (17%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 Ecoblue 180hp | 180 → 190 | +10 | 420 → 450 | +30 | Moderate (5.5/10) |
| 2.0T Ecoboost 245hp | 245 → 270 | +25 | 373 → 400 | +27 | Moderate (5.5/10) |
Get a personalised remap quote for your Ford Everest. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
