Expected gains of +25 BHP and +25 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Ford Everest 2.3T Ecoboost 275hp? A Stage 1 remap can take this 2018 - 2022 petrol engine from 275 BHP to 300 BHP and from 455 Nm to 480 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Everest can achieve.
The Ford Everest 2.3T Ecoboost 275hp is a 2.3L turbocharged petrol engine producing 275 BHP and 455 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 300 BHP and 480 Nm — a gain of around 25 BHP (9%) and 25 Nm (5%).
This engine has moderate remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 3.2 TDCI 195hp | 195 → 230 | +35 | 470 → 550 | +80 | Good (7/10) |
| 2.0 Ecoblue 214hp | 214 → 240 | +26 | 500 → 550 | +50 | Good (6.5/10) |
Get a personalised remap quote for your Ford Everest. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.