Considering an ECU remap for your Ford Figo 1.5 TDCI 100hp? A Stage 1 remap can take this 2015 - 2018 diesel engine from 100 BHP to 120 BHP and from 215 Nm to 270 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Figo can achieve.
The Ford Figo 1.5 TDCI 100hp is a 1.5L turbocharged diesel engine producing 100 BHP and 215 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 120 BHP and 270 Nm — a gain of around 20 BHP (20%) and 55 Nm (26%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.5 Ti-VCT 112hp | 112 → 120 | +8 | 136 → 150 | +14 | Moderate (4/10) |
Get a personalised remap quote for your Ford Figo. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
