Considering an ECU remap for your Ford Figo 1.5 Ti-VCT 112hp? A Stage 1 remap can take this 2015 - 2018 petrol engine from 112 BHP to 120 BHP and from 136 Nm to 150 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Figo can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Ford Figo 1.5 Ti-VCT 112hp is a 1.5L naturally aspirated petrol engine producing 112 BHP and 136 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 120 BHP and 150 Nm — a gain of around 8 BHP (7%) and 14 Nm (10%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain |
|---|
| Score |
|---|
| 1.5 TDCI 100hp | 100 → 120 | +20 | 215 → 270 | +55 | Good (7.5/10) |
Get a personalised remap quote for your Ford Figo. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
