Considering an ECU remap for your Ford Ranger 3.2 TDCi 200hp? A Stage 1 remap can take this 2019 - 2023 diesel engine from 200 BHP to 230 BHP and from 470 Nm to 550 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Ranger can achieve.
The Ford Ranger 3.2 TDCi 200hp is a 3.2L turbocharged diesel engine producing 200 BHP and 470 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 230 BHP and 550 Nm — a gain of around 30 BHP (15%) and 80 Nm (17%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 Ecoblue 170hp | 170 → 190 | +20 | 420 → 440 | +20 | Moderate (5.5/10) |
| 2.0 Ecoblue 213hp | 213 → 240 | +27 | 500 → 550 | +50 | Good (6.5/10) |
| 2.3T Ecoboost 270hp | 270 → 300 | +30 | 420 → 480 | +60 | Good (6/10) |
Get a personalised remap quote for your Ford Ranger. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
