Expected gains of +50 BHP and +139 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Ford Raptor 3.5 Ecoboost Raptor 450hp? A Stage 1 remap can take this 2010 - 2018 petrol engine from 450 BHP to 500 BHP and from 691 Nm to 830 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Raptor can achieve.
The Ford Raptor 3.5 Ecoboost Raptor 450hp is a 3.5L turbocharged petrol engine producing 450 BHP and 691 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 500 BHP and 830 Nm — a gain of around 50 BHP (11%) and 139 Nm (20%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 5.4 V8 310hp | 310 → 330 | +20 | 495 → 525 |
| +30 |
| Limited (3.5/10) |
| 6.2 V8 411hp | 411 → 430 | +19 | 588 → 610 | +22 | Limited (3/10) |
Get a personalised remap quote for your Ford Raptor. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.