Considering an ECU remap for your Ford Raptor 6.2 V8 411hp? A Stage 1 remap can take this 2010 - 2018 petrol engine from 411 BHP to 430 BHP and from 588 Nm to 610 Nm of torque (naturally aspirated). This engine scores 3/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Raptor can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Ford Raptor 6.2 V8 411hp is a 6.2L naturally aspirated petrol engine producing 411 BHP and 588 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 430 BHP and 610 Nm — a gain of around 19 BHP (5%) and 22 Nm (4%).
This engine has low remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine |
|---|
| BHP |
|---|
| Gain |
|---|
| Torque |
|---|
| Gain |
|---|
| Score |
|---|
| 5.4 V8 310hp | 310 → 330 | +20 | 495 → 525 | +30 | Limited (3.5/10) |
| 3.5 Ecoboost Raptor 450hp | 450 → 500 | +50 | 691 → 830 | +139 | Good (6.5/10) |
Get a personalised remap quote for your Ford Raptor. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
