Considering an ECU remap for your Ford Taurus 3.5 V6 263hp? A Stage 1 remap can take this All petrol engine from 263 BHP to 285 BHP and from 338 Nm to 360 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Taurus can achieve.
The Ford Taurus 3.5 V6 263hp is a 3.5L naturally aspirated petrol engine producing 263 BHP and 338 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 285 BHP and 360 Nm — a gain of around 22 BHP (8%) and 22 Nm (7%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.5T EcoBoost 182hp | 182 → 205 | +23 | 240 → 340 | +100 | Good (7.5/10) |
| 200 → 220 |
| +20 |
| 271 → 290 |
| +19 |
| Moderate (4/10) |
| 2.0T Ecoboost 245hp | 245 → 270 | +25 | 373 → 420 | +47 | Good (6/10) |
| 2.7T Ecoboost 330hp | 330 → 360 | +30 | 475 → 550 | +75 | Good (6/10) |
| 3.5T Ecoboost 365hp | 365 → 400 | +35 | 474 → 550 | +76 | Good (6/10) |
Get a personalised remap quote for your Ford Taurus. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
