Considering an ECU remap for your GMC Canyon 2.8i 175hp? A Stage 1 remap can take this 2003 - 2012 petrol engine from 175 BHP to 195 BHP and from 251 Nm to 270 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your GMC Canyon can achieve.
The GMC Canyon 2.8i 175hp is a 2.8L naturally aspirated petrol engine producing 175 BHP and 251 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 195 BHP and 270 Nm — a gain of around 20 BHP (11%) and 19 Nm (8%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.9i 185hp | 185 → 205 | +20 | 258 → 290 | +32 | Moderate (4.5/10) |
| 3.5 V6 220hp |
| 220 → 240 |
| +20 |
| 305 → 330 |
| +25 |
| Moderate (4/10) |
| 3.7 V6 242hp | 242 → 265 | +23 | 328 → 350 | +22 | Moderate (4/10) |
| 5.3 V8 300hp | 300 → 320 | +20 | 434 → 455 | +21 | Limited (3.5/10) |
Get a personalised remap quote for your GMC Canyon. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
