Considering an ECU remap for your GMC Canyon 3.5 V6 220hp? A Stage 1 remap can take this 2003 - 2012 petrol engine from 220 BHP to 240 BHP and from 305 Nm to 330 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your GMC Canyon can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The GMC Canyon 3.5 V6 220hp is a 3.5L naturally aspirated petrol engine producing 220 BHP and 305 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 240 BHP and 330 Nm — a gain of around 20 BHP (9%) and 25 Nm (8%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain |
|---|
| Score |
|---|
| 2.8i 175hp | 175 → 195 | +20 | 251 → 270 | +19 | Moderate (4/10) |
| 2.9i 185hp | 185 → 205 | +20 | 258 → 290 | +32 | Moderate (4.5/10) |
| 3.7 V6 242hp | 242 → 265 | +23 | 328 → 350 | +22 | Moderate (4/10) |
| 5.3 V8 300hp | 300 → 320 | +20 | 434 → 455 | +21 | Limited (3.5/10) |
Get a personalised remap quote for your GMC Canyon. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
