Considering an ECU remap for your Hyundai i10 1.2i 78hp? A Stage 1 remap can take this 2008 - 2018 petrol engine from 78 BHP to 88 BHP and from 119 Nm to 130 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai i10 can achieve.
The Hyundai i10 1.2i 78hp is a 1.2L naturally aspirated petrol engine producing 78 BHP and 119 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 88 BHP and 130 Nm — a gain of around 10 BHP (13%) and 11 Nm (9%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| 69 → 79 |
| +10 |
| 95 → 110 |
| +15 |
| Moderate (5.5/10) |
| 1.1 CRDi 75hp | 75 → 95 | +20 | 153 → 190 | +37 | Good (7.5/10) |
| 1.2i 84hp | 84 → 88 | +4 | 114 → 130 | +16 | Moderate (4/10) |
Get a personalised remap quote for your Hyundai i10. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
