Expected gains of +20 BHP and +39 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Hyundai Palisade 2.2 CRDi 200hp? A Stage 1 remap can take this 2019 -> diesel engine from 200 BHP to 220 BHP and from 441 Nm to 480 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai Palisade can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Hyundai Palisade 2.2 CRDi 200hp is a 2.2L turbocharged diesel engine producing 200 BHP and 441 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 220 BHP and 480 Nm — a gain of around 20 BHP (10%) and 39 Nm (9%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain |
|---|
| Score |
|---|
| 2.2 CRDi 193hp | 193 → 220 | +27 | 441 → 480 | +39 | Good (6.5/10) |
| 3.8 GDI V6 295hp | 295 → 310 | +15 | 355 → 380 | +25 | Moderate (4/10) |
Get a personalised remap quote for your Hyundai Palisade. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.