Expected gains of +15 BHP and +25 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Hyundai Palisade 3.8 GDI V6 295hp? A Stage 1 remap can take this 2019 -> petrol engine from 295 BHP to 310 BHP and from 355 Nm to 380 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai Palisade can achieve.
The Hyundai Palisade 3.8 GDI V6 295hp is a 3.8L naturally aspirated petrol engine producing 295 BHP and 355 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 310 BHP and 380 Nm — a gain of around 15 BHP (5%) and 25 Nm (7%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.2 CRDi 193hp | 193 → 220 | +27 | 441 → 480 | +39 | Good (6.5/10) |
| 200 → 220 |
| +20 |
| 441 → 480 |
| +39 |
| Moderate (5.5/10) |
Get a personalised remap quote for your Hyundai Palisade. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.