Considering an ECU remap for your Hyundai Santa Fe 2.0T 264hp? A Stage 1 remap can take this 2013 - 2018 petrol engine from 264 BHP to 300 BHP and from 365 Nm to 450 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai Santa Fe can achieve.
The Hyundai Santa Fe 2.0T 264hp is a 2.0L turbocharged petrol engine producing 264 BHP and 365 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 300 BHP and 450 Nm — a gain of around 36 BHP (14%) and 85 Nm (23%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 CRDi 150hp | 150 → 180 | +30 | 335 → 400 |
| +65 |
| Good (7/10) |
| 2.4 GDI 192hp | 192 → 200 | +8 | 242 → 255 | +13 | Limited (3.5/10) |
| 2.2 CRDI 200hp | 200 → 230 | +30 | 440 → 500 | +60 | Good (6.5/10) |
Get a personalised remap quote for your Hyundai Santa Fe. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
