Considering an ECU remap for your Hyundai Santa Fe 2.4 GDI 192hp? A Stage 1 remap can take this 2013 - 2018 petrol engine from 192 BHP to 200 BHP and from 242 Nm to 255 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai Santa Fe can achieve.
The Hyundai Santa Fe 2.4 GDI 192hp is a 2.4L naturally aspirated petrol engine producing 192 BHP and 242 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 255 Nm — a gain of around 8 BHP (4%) and 13 Nm (5%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 CRDi 150hp | 150 → 180 | +30 | 335 → 400 | +65 | Good (7/10) |
| 2.2 CRDI 200hp | 200 → 230 | +30 | 440 → 500 | +60 | Good (6.5/10) |
| 2.0T 264hp | 264 → 300 | +36 | 365 → 450 | +85 | Good (6.5/10) |
Get a personalised remap quote for your Hyundai Santa Fe. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
