Expected gains of +20 BHP and +20 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Isuzu I-Series I-280 2.8 175hp? A Stage 1 remap can take this All petrol engine from 175 BHP to 195 BHP and from 250 Nm to 270 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Isuzu I-Series can achieve.
The Isuzu I-Series I-280 2.8 175hp is a 2.8L naturally aspirated petrol engine producing 175 BHP and 250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 195 BHP and 270 Nm — a gain of around 20 BHP (11%) and 20 Nm (8%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| I-290 2.9 185hp | 185 → 205 | +20 | 258 → 275 | +17 | Moderate (4/10) |
| I-350 3.5 220hp | 220 → 240 | +20 | 305 → 325 | +20 | Moderate (4/10) |
| I-370 3.7 242hp | 242 → 260 | +18 | 328 → 350 | +22 | Moderate (4/10) |
Get a personalised remap quote for your Isuzu I-Series. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.