Expected gains of +20 BHP and +17 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Isuzu I-Series I-290 2.9 185hp? A Stage 1 remap can take this All petrol engine from 185 BHP to 205 BHP and from 258 Nm to 275 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Isuzu I-Series can achieve.
The Isuzu I-Series I-290 2.9 185hp is a 2.9L naturally aspirated petrol engine producing 185 BHP and 258 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 205 BHP and 275 Nm — a gain of around 20 BHP (11%) and 17 Nm (7%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| I-280 2.8 175hp | 175 → 195 | +20 | 250 → 270 | +20 | Moderate (4/10) |
| 220 → 240 |
| +20 |
| 305 → 325 |
| +20 |
| Moderate (4/10) |
| I-370 3.7 242hp | 242 → 260 | +18 | 328 → 350 | +22 | Moderate (4/10) |
Get a personalised remap quote for your Isuzu I-Series. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.