Considering an ECU remap for your Isuzu N-Series 3.0D 150hp? A Stage 1 remap can take this All diesel engine from 150 BHP to 190 BHP and from 375 Nm to 420 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Isuzu N-Series can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Isuzu N-Series 3.0D 150hp is a 3.0L turbocharged diesel engine producing 150 BHP and 375 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 420 Nm — a gain of around 40 BHP (27%) and 45 Nm (12%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque |
|---|
| Gain |
|---|
| Score |
|---|
| 3.0D 190hp | 190 → 240 | +50 | 513 → 600 | +87 | Good (7.5/10) |
Get a personalised remap quote for your Isuzu N-Series. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
