Considering an ECU remap for your Isuzu N-Series 3.0D 190hp? A Stage 1 remap can take this All diesel engine from 190 BHP to 240 BHP and from 513 Nm to 600 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Isuzu N-Series can achieve.
The Isuzu N-Series 3.0D 190hp is a 3.0L turbocharged diesel engine producing 190 BHP and 513 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 240 BHP and 600 Nm — a gain of around 50 BHP (26%) and 87 Nm (17%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 3.0D 150hp | 150 → 190 | +40 | 375 → 420 | +45 | Good (7/10) |
Get a personalised remap quote for your Isuzu N-Series. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
