Jaguar E Pace D150 (2.0D) 150hp Remap

The Jaguar E Pace D150 (2.0D) 150hp is a 2.0L turbocharged diesel engine producing 150 BHP and 380 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 210 BHP and 490 Nm — a gain of around 60 BHP (40%) and 110 Nm (29%).

This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

From a technical perspective, the transmission is many variants use zf 8-speed automatic (where fitted). at this torque level, transmission and driveline servicing history becomes especially important..

Considerations: High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.

Fuel economy note: possible improvement with conservative driving.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.