Jaguar E Pace P300 (3.0T) 300hp Remap

The Jaguar E Pace P300 (3.0T) 300hp is a 3.0L turbocharged petrol engine producing 300 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 320 BHP and 450 Nm — a gain of around 20 BHP (7%) and 50 Nm (12%).

This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.

From a technical perspective, the transmission is many variants use zf 8-speed automatic (where fitted). at this torque level, transmission and driveline servicing history becomes especially important..

Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.