Expected gains of +30 BHP and +60 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Jeep Gladiator 3.0 Multijet V6 264hp? A Stage 1 remap can take this 2020 -> ... diesel engine from 264 BHP to 294 BHP and from 600 Nm to 660 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jeep Gladiator can achieve.
The Jeep Gladiator 3.0 Multijet V6 264hp is a 3.0L turbocharged diesel engine producing 264 BHP and 600 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 294 BHP and 660 Nm — a gain of around 30 BHP (11%) and 60 Nm (10%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 3.6 V6 285hp | 285 → 301 | +16 | 353 → 375 | +22 | Moderate (4/10) |
Get a personalised remap quote for your Jeep Gladiator. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.