Considering an ECU remap for your Jeep Gladiator 3.6 V6 285hp? A Stage 1 remap can take this 2020 -> ... petrol engine from 285 BHP to 301 BHP and from 353 Nm to 375 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jeep Gladiator can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Jeep Gladiator 3.6 V6 285hp is a 3.6L naturally aspirated petrol engine producing 285 BHP and 353 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 301 BHP and 375 Nm — a gain of around 16 BHP (6%) and 22 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain |
|---|
| Score |
|---|
| 3.0 Multijet V6 264hp | 264 → 294 | +30 | 600 → 660 | +60 | Good (6.5/10) |
Get a personalised remap quote for your Jeep Gladiator. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
