Considering an ECU remap for your Jeep Wrangler 3.8 V6 200hp? A Stage 1 remap can take this 2007 - 2010 petrol engine from 200 BHP to 220 BHP and from 321 Nm to 340 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jeep Wrangler can achieve.
The Jeep Wrangler 3.8 V6 200hp is a 3.8L naturally aspirated petrol engine producing 200 BHP and 321 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 220 BHP and 340 Nm — a gain of around 20 BHP (10%) and 19 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.8 CRD 163 - 177hp | 177 → 207 | +30 | 410 → 520 | +110 | Good (7/10) |
| 3.6 V6 285hp | 285 → 305 | +20 | 353 → 375 | +22 | Moderate (4/10) |
Get a personalised remap quote for your Jeep Wrangler. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
