Considering an ECU remap for your Kia Stonic 1.2 MPI 84hp? A Stage 1 remap can take this 2017 - 2019 petrol engine from 84 BHP to 100 BHP and from 122 Nm to 140 Nm of torque (naturally aspirated). This engine scores 5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Stonic can achieve.
The Kia Stonic 1.2 MPI 84hp is a 1.2L naturally aspirated petrol engine producing 84 BHP and 122 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 100 BHP and 140 Nm — a gain of around 16 BHP (19%) and 18 Nm (15%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.0 T-GDI 100hp | 100 → 140 | +40 | 171 → 230 | +59 | Excellent (8/10) |
| 1.6 CRDi 110hp | 110 → 145 | +35 | 260 → 320 | +60 | Good (7.5/10) |
| 1.0 T-GDI 120hp | 120 → 140 | +20 | 171 → 230 | +59 | Good (7.5/10) |
Get a personalised remap quote for your Kia Stonic. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
