Considering an ECU remap for your Kia Stonic 1.6 CRDi 110hp? A Stage 1 remap can take this 2017 - 2019 petrol engine from 110 BHP to 145 BHP and from 260 Nm to 320 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Stonic can achieve.
The Kia Stonic 1.6 CRDi 110hp is a 1.6L turbocharged petrol engine producing 110 BHP and 260 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 145 BHP and 320 Nm — a gain of around 35 BHP (32%) and 60 Nm (23%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.2 MPI 84hp | 84 → 100 | +16 | 122 → 140 | +18 | Moderate (5/10) |
| 100 → 140 |
| +40 |
| 171 → 230 |
| +59 |
| Excellent (8/10) |
| 1.0 T-GDI 120hp | 120 → 140 | +20 | 171 → 230 | +59 | Good (7.5/10) |
Get a personalised remap quote for your Kia Stonic. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
