Considering an ECU remap for your Lotus Evora 3.5 V6 280hp? A Stage 1 remap can take this All petrol engine from 280 BHP to 305 BHP and from 350 Nm to 410 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Lotus Evora can achieve.
The Lotus Evora 3.5 V6 280hp is a 3.5L naturally aspirated petrol engine producing 280 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 305 BHP and 410 Nm — a gain of around 25 BHP (9%) and 60 Nm (17%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 3.5 V6 S / SR 350hp | 350 → 360 | +10 | 400 → 415 | +15 | Limited (3/10) |
| 3.5 V6 400 406hp | 406 → 440 | +34 | 410 → 460 | +50 | Moderate (4.5/10) |
Get a personalised remap quote for your Lotus Evora. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
