Considering an ECU remap for your Lotus Evora 3.5 V6 400 406hp? A Stage 1 remap can take this All petrol engine from 406 BHP to 440 BHP and from 410 Nm to 460 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Lotus Evora can achieve.
The Lotus Evora 3.5 V6 400 406hp is a 3.5L naturally aspirated petrol engine producing 406 BHP and 410 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 440 BHP and 460 Nm — a gain of around 34 BHP (8%) and 50 Nm (12%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 3.5 V6 280hp | 280 → 305 | +25 | 350 → 410 |
| +60 |
| Moderate (4.5/10) |
| 3.5 V6 S / SR 350hp | 350 → 360 | +10 | 400 → 415 | +15 | Limited (3/10) |
Get a personalised remap quote for your Lotus Evora. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
