Mazda 3 MPS 260hp Remap

Name: Mazda 3 MPS 260hp ECU Remap
Brand: Mazda

Expected gains of +35 BHP and +70 Nm torque

Get Your Free Quote ↓

BHP+35 hp (13%)

Standard

260 hp

Tuned

295 hp

Torque+70 Nm (18%)

Standard

380 Nm

Tuned

450 Nm

Suitability

Moderate (5/10)

Gains Profile

Torque-focused

Headroom

Medium

Mazda 3 MPS 260hp ECU Remapping

Considering an ECU remap for your Mazda 3 MPS 260hp? A Stage 1 remap can take this 2003 - 2009 petrol engine from 260 BHP to 295 BHP and from 380 Nm to 450 Nm of torque (naturally aspirated). This engine scores 5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mazda 3 can achieve.

How this engine compares

5thof 24 Mazda 3 engines by power gain
54%of the 9,842 engines we hold gain data for see a smaller power increase
55%of engines with torque data see a smaller torque increase

Comparisons are calculated from our own recorded Stage 1 figures.

Assessment

The Mazda 3 MPS 260hp is a 2.3L naturally aspirated petrol engine producing 260 BHP and 380 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 295 BHP and 450 Nm — a gain of around 35 BHP (13%) and 70 Nm (18%).

This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.

Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.

Considerations

!Naturally aspirated engine: gains are usually limited; results vary widely.

!High tuned torque: check transmission torque capacity and service history.

Other 3 2003 - 2009 Engines

Engine

Technical Specifications

Fuel Type: Petrol
Aspiration: Naturally Aspirated
Displacement: 2.3L
Capacity: 2261 CC
Type: Car
Engine Family: Mazda 2.3L NA Petrol

ECU & Transmission

Likely ECU Low confidence: Petrol ECU (varies by market/year)
Gearbox Low confidence: Transmission varies by trim and market; check manual/automatic type and torque rating. At this torque level, transmission and driveline servicing history becomes especially important.

Get Your Free Quote

Get a personalised remap quote for your Mazda 3. We'll connect you with a trusted professional in your area.

Confirm Your Vehicle

MakeMazda

Model3

Generation2003 - 2009

EngineMPS 260hp

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.

We recommend discussing your specific vehicle with a qualified remap professional before proceeding.

1.4i 16v 84hp	84 → 90	+6	122 → 135	+13	Moderate (4/10)
1.6 CiTD 90hp	90 → 120	+30	210 → 270	+60	Excellent (8/10)
1.6i 16v 105hp	105 → 115	+10	145 → 160	+15	Moderate (4/10)
1.6 CiTD 110hp	110 → 140	+30	245 → 315	+70	Good (7.5/10)
2.0 CiTD 143hp	143 → 170	+27	360 → 410	+50	Good (6.5/10)
2.2 CiTD 185hp	185 → 210	+25	400 → 470	+70	Good (6.5/10)