Mercedes-Benz Trucks Actros 3340 394hp Remap

The Mercedes-Benz Trucks Actros 3340 394hp is a naturally aspirated unknown fuel type engine producing 394 BHP and 1850 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 455 BHP and 2150 Nm — a gain of around 61 BHP (15%) and 300 Nm (16%).

This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.

Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.. High tuned torque: check transmission torque capacity and service history.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.