Mercedes-Benz E 350 CDI Bluetec 252hp Remap

The Mercedes-Benz E 350 CDI Bluetec 252hp is a 3.0L turbocharged diesel engine producing 252 BHP and 620 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 290 BHP and 700 Nm — a gain of around 38 BHP (15%) and 80 Nm (13%).

This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.

Considerations: High tuned torque: check transmission torque capacity and service history.. Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.

Fuel economy note: possible improvement with conservative driving.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.