Considering an ECU remap for your MG ZS 1.0 T-GDI 111hp? A Stage 1 remap can take this All petrol engine from 111 BHP to 140 BHP and from 160 Nm to 230 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your MG ZS can achieve.
The MG ZS 1.0 T-GDI 111hp is a 1.0L turbocharged petrol engine producing 111 BHP and 160 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 230 Nm — a gain of around 29 BHP (26%) and 70 Nm (44%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.5 V6 180hp | 180 → 195 | +15 | 240 → 265 |
| +25 |
| Moderate (4/10) |
Get a personalised remap quote for your MG ZS. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
