Considering an ECU remap for your MG ZS 2.5 V6 180hp? A Stage 1 remap can take this All petrol engine from 180 BHP to 195 BHP and from 240 Nm to 265 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your MG ZS can achieve.
The MG ZS 2.5 V6 180hp is a 2.5L naturally aspirated petrol engine producing 180 BHP and 240 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 195 BHP and 265 Nm — a gain of around 15 BHP (8%) and 25 Nm (10%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.0 T-GDI 111hp | 111 → 140 | +29 | 160 → 230 | +70 | Excellent (8/10) |
Get a personalised remap quote for your MG ZS. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
