Expected gains of +13 BHP and +20 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Mitsubishi Eclipse Cross 1.5 T-MIVEC 163hp? A Stage 1 remap can take this 2017 - 2020 petrol engine from 163 BHP to 176 BHP and from 250 Nm to 270 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mitsubishi Eclipse Cross can achieve.
The Mitsubishi Eclipse Cross 1.5 T-MIVEC 163hp is a 1.5L naturally aspirated petrol engine producing 163 BHP and 250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 176 BHP and 270 Nm — a gain of around 13 BHP (8%) and 20 Nm (8%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.2 DiD 150hp | 150 → 185 | +35 | 400 → 450 | +50 | Good (7/10) |
Get a personalised remap quote for your Mitsubishi Eclipse Cross. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.