Expected gains of +35 BHP and +50 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Mitsubishi Eclipse Cross 2.2 DiD 150hp? A Stage 1 remap can take this 2017 - 2020 diesel engine from 150 BHP to 185 BHP and from 400 Nm to 450 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mitsubishi Eclipse Cross can achieve.
The Mitsubishi Eclipse Cross 2.2 DiD 150hp is a 2.2L turbocharged diesel engine producing 150 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 185 BHP and 450 Nm — a gain of around 35 BHP (23%) and 50 Nm (12%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.5 T-MIVEC 163hp | 163 → 176 | +13 | 250 → 270 | +20 | Moderate (4/10) |
Get a personalised remap quote for your Mitsubishi Eclipse Cross. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.