Expected gains of +40 BHP and +65 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Peugeot 3008 1.6 BlueHDI 8V 100hp? A Stage 1 remap can take this 2016 - 2020 diesel engine from 100 BHP to 140 BHP and from 255 Nm to 320 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 3008 can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Peugeot 3008 1.6 BlueHDI 8V 100hp is a 1.6L turbocharged diesel engine producing 100 BHP and 255 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 320 Nm — a gain of around 40 BHP (40%) and 65 Nm (25%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain |
|---|
| Torque |
|---|
| Gain |
|---|
| Score |
|---|
| 1.6 e-HDI 8V 115hp | 115 → 140 | +25 | 270 → 350 | +80 | Good (7.5/10) |
| 1.6 BlueHDI 8V 120hp | 120 → 140 | +20 | 300 → 350 | +50 | Good (7/10) |
| 1.5 BlueHDI 130hp | 130 → 160 | +30 | 300 → 360 | +60 | Excellent (8/10) |
| 1.2T Puretech 130hp | 130 → 150 | +20 | 230 → 270 | +40 | Good (7/10) |
| 2.0 BlueHDi 150hp | 150 → 205 | +55 | 370 → 460 | +90 | Excellent (8.5/10) |
| 1.6 e-THP 165hp | 165 → 190 | +25 | 240 → 320 | +80 | Good (7.5/10) |
| 1.6 Puretech 180hp | 180 → 215 | +35 | 250 → 300 | +50 | Good (7/10) |
| 2.0 BlueHDi 180hp | 180 → 205 | +25 | 400 → 460 | +60 | Good (6.5/10) |
| 1.6 e-THP 205hp | 205 → 230 | +25 | 275 → 340 | +65 | Good (7/10) |
Get a personalised remap quote for your Peugeot 3008. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.