Renault Master 2.3 DCi 150hp Remap

Name: Renault Master 2.3 DCi 150hp ECU Remap
Brand: Renault

Expected gains of +60 BHP and +95 Nm torque

Get Your Free Quote ↓

BHP+60 hp (40%)

Standard

150 hp

Tuned

210 hp

Torque+95 Nm (25%)

Standard

385 Nm

Tuned

480 Nm

Suitability

Excellent (8.5/10)

Gains Profile

Power-focused

Headroom

High

Renault Master 2.3 DCi 150hp ECU Remapping

Considering an ECU remap for your Renault Master 2.3 DCi 150hp? A Stage 1 remap can take this Mk5 - 2019 -> diesel engine from 150 BHP to 210 BHP and from 385 Nm to 480 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Master can achieve.

How this engine compares

3rdof 29 Renault Master engines by power gain
86%of the 9,842 engines we hold gain data for see a smaller power increase
78%of engines with torque data see a smaller torque increase

Comparisons are calculated from our own recorded Stage 1 figures.

Assessment

The Renault Master 2.3 DCi 150hp is a 2.3L turbocharged diesel engine producing 150 BHP and 385 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 210 BHP and 480 Nm — a gain of around 60 BHP (40%) and 95 Nm (25%).

This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

Considerations: High tuned torque: check transmission torque capacity and service history.

Fuel economy note: possible improvement with conservative driving.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.

Considerations

!High tuned torque: check transmission torque capacity and service history.

Other Master Mk5 - 2019 -> Engines

Engine	BHP	Gain	Torque

Technical Specifications

Fuel Type: Diesel
Aspiration: Turbocharged
Displacement: 2.3L
Type: Car
Engine Family: Renault 2.3L dCi Turbo Diesel

ECU & Transmission

Likely ECU Low confidence: Bosch EDC17 / Continental SID (varies)
Gearbox Low confidence: Transmission varies by trim and market; check manual/automatic type and torque rating. At this torque level, transmission and driveline servicing history becomes especially important.

Get Your Free Quote

Get a personalised remap quote for your Renault Master. We'll connect you with a trusted professional in your area.

Confirm Your Vehicle

MakeRenault

ModelMaster

GenerationMk5 - 2019 ->

Engine2.3 DCi 150hp

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.

We recommend discussing your specific vehicle with a qualified remap professional before proceeding.

2.3 DCi 130hp	130 → 180	+50	330 → 420	+90	Excellent (8/10)
2.3 DCi 135hp	135 → 210	+75	360 → 480	+120	Excellent (8/10)
2.3 DCi 145hp	145 → 210	+65	360 → 440	+80	Excellent (8.5/10)
2.3 DCi 165hp	165 → 210	+45	380 → 440	+60	Good (7.5/10)
2.3 DCi 180hp	180 → 210	+30	400 → 480	+80	Good (7/10)