Considering an ECU remap for your Renault Maxity 2.5 DCi 130hp? A Stage 1 remap can take this 2016 -> diesel engine from 130 BHP to 160 BHP and from 300 Nm to 340 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Maxity can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Renault Maxity 2.5 DCi 130hp is a 2.5L turbocharged diesel engine producing 130 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 340 Nm — a gain of around 30 BHP (23%) and 40 Nm (13%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 3.0 DCi 130hp | 130 → 180 | +50 |
| 300 → 410 |
| +110 |
| Excellent (8/10) |
| 3.0 DCi 150hp | 150 → 180 | +30 | 350 → 410 | +60 | Good (7/10) |
Get a personalised remap quote for your Renault Maxity. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
