Considering an ECU remap for your Renault Maxity 3.0 DCi 130hp? A Stage 1 remap can take this 2016 -> diesel engine from 130 BHP to 180 BHP and from 300 Nm to 410 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Maxity can achieve.
The Renault Maxity 3.0 DCi 130hp is a 3.0L turbocharged diesel engine producing 130 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 410 Nm — a gain of around 50 BHP (38%) and 110 Nm (37%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: economy gains unlikely at full power; depends on driving style.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.5 DCi 130hp | 130 → 160 | +30 | 300 → 340 | +40 | Good (7/10) |
| 3.0 DCi 150hp | 150 → 180 | +30 | 350 → 410 | +60 | Good (7/10) |
Get a personalised remap quote for your Renault Maxity. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
