Considering an ECU remap for your Rover 75 2.0 CDTI 115hp? A Stage 1 remap can take this All diesel engine from 115 BHP to 142 BHP and from 260 Nm to 302 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Rover 75 can achieve.
The Rover 75 2.0 CDTI 115hp is a 2.0L turbocharged diesel engine producing 115 BHP and 260 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 142 BHP and 302 Nm — a gain of around 27 BHP (23%) and 42 Nm (16%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 CDTI 131hp | 131 → 160 | +29 | 300 → 360 | +60 | Excellent (8/10) |
Get a personalised remap quote for your Rover 75. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
