Seat Ateca 1.0 TSI 116hp Remap

Name: Seat Ateca 1.0 TSI 116hp ECU Remap
Brand: Seat

Expected gains of +19 BHP and +50 Nm torque

Get Your Free Quote ↓

BHP+19 hp (16%)

Standard

116 hp

Tuned

135 hp

Torque+50 Nm (25%)

Standard

200 Nm

Tuned

250 Nm

Suitability

Good (7.5/10)

Gains Profile

Torque-focused

Headroom

High

Seat Ateca 1.0 TSI 116hp ECU Remapping

Considering an ECU remap for your Seat Ateca 1.0 TSI 116hp? A Stage 1 remap can take this 2020 -> petrol engine from 116 BHP to 135 BHP and from 200 Nm to 250 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Seat Ateca can achieve.

How this engine compares

16thof 16 Seat Ateca engines by power gain
13%of the 9,842 engines we hold gain data for see a smaller power increase
27%of engines with torque data see a smaller torque increase

Comparisons are calculated from our own recorded Stage 1 figures.

Assessment

The Seat Ateca 1.0 TSI 116hp is a 1.0L turbocharged petrol engine producing 116 BHP and 200 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 135 BHP and 250 Nm — a gain of around 19 BHP (16%) and 50 Nm (25%).

This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.

Considerations

!Turbo petrol: fuel quality and cooling can influence repeatable performance.

Other Ateca 2020 -> Engines

Engine	BHP	Gain	Torque	Gain

Technical Specifications

Fuel Type: Petrol
Aspiration: Turbocharged
Displacement: 1L
Capacity: 999 CC
Type: Car
Engine Family: SEAT 1.0L TSI Turbo Petrol

ECU & Transmission

Likely ECU Low confidence: Petrol ECU (varies by market/year)
Gearbox Low confidence: Transmission varies by trim and market; check manual/automatic type and torque rating.

Get Your Free Quote

Get a personalised remap quote for your Seat Ateca. We'll connect you with a trusted professional in your area.

Confirm Your Vehicle

MakeSeat

ModelAteca

Generation2020 ->

Engine1.0 TSI 116hp

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.

We recommend discussing your specific vehicle with a qualified remap professional before proceeding.

2.0 TDI 115hp	115 → 200	+85	300 → 430	+130	Excellent (8/10)
1.5 TGI 130hp	130 → 155	+25	200 → 250	+50	Moderate (5.5/10)
1.5 TSI 150hp	150 → 180	+30	250 → 335	+85	Good (7.5/10)
1.4 TSI 150hp	150 → 175	+25	250 → 320	+70	Good (7.5/10)
2.0 TDI 150hp	150 → 200	+50	360 → 430	+70	Good (7.5/10)
2.0 TDI 190hp	190 → 225	+35	400 → 460	+60	Good (7/10)
2.0 TSI 190hp	190 → 245	+55	320 → 430	+110	Excellent (8/10)