Expected gains of +29 BHP and +60 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Subaru Forester 2.0 D boxer 148hp? A Stage 1 remap can take this 2018 - 2020 diesel engine from 148 BHP to 177 BHP and from 350 Nm to 410 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Subaru Forester can achieve.
The Subaru Forester 2.0 D boxer 148hp is a 2.0L turbocharged diesel engine producing 148 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 177 BHP and 410 Nm — a gain of around 29 BHP (20%) and 60 Nm (17%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 XT 241hp | 241 → 270 | +29 | 350 → 410 | +60 | Moderate (4.5/10) |
Get a personalised remap quote for your Subaru Forester. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.