Considering an ECU remap for your Subaru Forester 2.0 XT 241hp? A Stage 1 remap can take this 2018 - 2020 petrol engine from 241 BHP to 270 BHP and from 350 Nm to 410 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Subaru Forester can achieve.
The Subaru Forester 2.0 XT 241hp is a 2.0L naturally aspirated petrol engine producing 241 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 270 BHP and 410 Nm — a gain of around 29 BHP (12%) and 60 Nm (17%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 D boxer 148hp | 148 → 177 | +29 | 350 → 410 |
| +60 |
| Good (7/10) |
Get a personalised remap quote for your Subaru Forester. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
