Considering an ECU remap for your Subaru Liberty 2.0GT-S 295hp? A Stage 1 remap can take this 2014 -> petrol engine from 295 BHP to 325 BHP and from 400 Nm to 460 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Subaru Liberty can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Subaru Liberty 2.0GT-S 295hp is a 2.0L naturally aspirated petrol engine producing 295 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 325 BHP and 460 Nm — a gain of around 30 BHP (10%) and 60 Nm (15%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine |
|---|
| BHP |
|---|
| Gain |
|---|
| Torque |
|---|
| Gain |
|---|
| Score |
|---|
| 3.6VCT 260hp | 260 → 290 | +30 | 350 → 410 | +60 | Moderate (4.5/10) |
Get a personalised remap quote for your Subaru Liberty. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
